The EPEVER Tracer AN Collection Photo voltaic Charge Controller can be a really efficient solar controller made for off-grid solar programs. Dependant on multiphase synchronous rectification engineering, it assures optimized Electricity conversion and process steadiness for a variety of photovoltaic (PV) applications.
Key Attributes from the EPEVER Tracer AN Sequence Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller engineering for outstanding solar Vitality harvesting. Crucial characteristics incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
State-of-the-art MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery daily life.
LCD Screen with actual-time info monitoring.
Numerous Load Manage Modes which includes guide and timer.
Thorough Electronic Protections towards overcharging, more than-discharging, brief circuits, and reverse polarity.
Stage-by-Step Guide to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Verify the product range and voltage rankings match your solar panel and battery technical specs.
two. Mounting the Demand Controller
Decide on a effectively-ventilated, dry place close to the battery lender.
Safe the Tracer AN controller using the supplied mounting brackets.
Maintain good clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Warning: Often adhere to proper protection protocols and make sure the program is powered off right before connecting parts.
Phase 1: Join the battery terminals to your cost controller (good to positive, negative to negative).
Action 2: Join the photo voltaic panel array towards the PV enter terminals.
Action 3: Connect the load terminals if employing a direct load connection.
Move four: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Options
Electrical power on the controller by connecting the battery to start with.
Make use of the Liquid crystal display display to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild Command.
5. Checking and Knowledge Logging
The Tracer AN Series supports serious-time checking using the MT50 distant meter.
Information can be logged by means of the RS485 conversation port using program including Photo voltaic Station Personal computer.
Remote checking is possible While using the EPEVER WiFi module.
six. Troubleshooting Frequent Issues
Situation one: No Electricity Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: In excess of-Voltage Protection
Validate the solar array’s voltage score.
Adjust process parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings from the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:
Increased Efficiency: Lowered Electrical power losses for the duration of conversion.
Increased Reliability: Secure overall performance underneath variable loads.
For a longer Click Here time Battery Everyday living: Steady and exact charging profiles.
Conclusion
The EPEVER Solar Demand Controller with multiphase synchronous rectification technologies is really an Outstanding choice for optimizing solar energy generation and lengthening battery lifetime. By following the above set up guide, consumers can assure optimum effectiveness and procedure longevity.