The EPEVER Tracer AN Series Solar Cost Controller is a very successful photo voltaic controller suitable for off-grid photo voltaic systems. Determined by multiphase synchronous rectification technological know-how, it ensures optimized Power conversion and program balance for an array of photovoltaic (PV) apps.
Critical Options of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technology for exceptional solar Power harvesting. Crucial functions incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Power conversion.
Highly developed MPPT Algorithm with >99% efficiency.
Twin-Stage Charging for enhanced battery life.
LCD Show with authentic-time facts checking.
A number of Load Management Modes which include guide and timer.
Thorough Electronic Protections from overcharging, about-discharging, small circuits, and reverse polarity.
Action-by-Phase Guidebook to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Planning the Controller
Ensure all elements are provided: Tracer AN unit, temperature sensor, communication cables, and person manual.
Validate the product number and voltage scores match your solar panel and battery specifications.
two. Mounting the Charge Controller
Select a perfectly-ventilated, dry place near the battery financial institution.
Secure the Tracer AN controller utilizing the supplied mounting brackets.
Maintain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Charge Controller
Warning: Usually abide by appropriate basic safety protocols and make sure the technique is run off ahead of connecting parts.
Stage one: Connect the battery terminals on the charge controller (constructive to favourable, damaging to destructive).
Step two: Join the solar panel array on the PV enter terminals.
Stage three: Join the load terminals if employing a direct load relationship.
Stage 4: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Configurations
Ability over the controller by connecting the battery 1st.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, gentle Manage.
five. Monitoring and Details Logging
The Tracer AN Series supports true-time monitoring utilizing the MT50 remote meter.
Details could be logged through the RS485 interaction port employing software program which include Solar Station PC.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Concern one: No Electricity Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Situation 2: Around-Voltage Safety
Validate the solar array’s voltage ranking.
Alter procedure parameters if required.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings from the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification know-how ensures:
Better Efficiency: Diminished energy losses for the duration of conversion.
Increased Reliability: Steady performance beneath variable hundreds.
For a longer period Battery Daily life: Consistent and accurate charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification know-how is an Extraordinary option for optimizing solar power era and increasing battery lifestyle. By subsequent the above mentioned set up guidebook, people Click Here can ensure highest performance and procedure longevity.